Back to Top
EP6228-3132 EtherCAT Box
The EP6228-3132 IO-Link module enables connection of up to eight IO-Link devices, e.g. IO-Link box modules, actuators, sensors or combinations thereof. The EP6228-3132 has 4 x Class A and 4 x Class B ports. The Class B ports provide an additional supply voltage for IO-Link devices with higher power requirements. The EP6228-3132 additionally offers further digital inputs on the four Class A master ports. A point-to-point connection is used between the module and the device.
Protocol: EtherCAT
Bus interface: 2 x M8 socket, shielded, screw type
Data transfer rates: 4.8 kbaud, 38.4 kbaud and 230.4 kbaud
Specification version: IO-Link V1.1, 4 x Class A, 4 x Class B
IO-Link interfaces: 8
Connection method: M12, screw type
Number of inputs: 4 digital inputs
Nominal input voltage: 24 V DC (-15 %/+20 %)
Input filter: 10 µs
“0” signal voltage: -3…+5 V
“1” signal voltage: 11…30 V, 6 mA input current (EN 61131-2, type 3)
Input current: typ. 3 mA (EN 61131-2, type 3)
Nominal voltage: 24 V DC (-15 %/+20 %)
IO-Link sensor supply L+: 24 V DC, 1.4 A per port, ∑ 5.6 A
IO-Link extra power P24: 24 V DC, max. 4.0 A per port, ∑ 4.0 A for 2 ports each for Class B
Current consumption from US: typ. 130 mA + load
Power supply connection: feed: 1 x 7/8" plug, 5-pin; downstream connection: 1 x 7/8" socket, 5-pin
Special features: Class A ports: 1, 2, 5, 6; Class B ports: 3, 4, 7, 8
Electrical isolation: 500 V
Weight: approx. 440 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL in preparation
Write Your Own Review
Write your content here...
