Back to Top
Tamper-proof (Pre-set) Thermostat, Contact maker (NO), +40°C to +50°C Thermostat Set Point
Pricing available on request
Tamper-proof (Pre-set) Thermostat FTS 011:
- In order to control filter fans, heat exchangers, cooling devices, or to switch signal devices when a temperature limit has been exceeded, use the contact maker/NO (blue casing).
- An increase in temperature causes the contact to close.
Specifications:
- Thermostat Set Point: +40°C to +50°C.
- Contact Rating: 5A at 240VAC.
- Contact Operation: Normally Open (NO).
- Load Type: Resistive.
- Mounting: DIN Rail.
- Sensor Element: Thermostatic bimetal.
- Contact Type: Snap-action contact.
- Service Life: >100,000 cycles.
- Max. Switching Capacity: 10A resistive / 2A inductive @ AC 120V, 5A resistive / 1.6A inductive @ AC 250V, DC 30W.
- Max. Inrush Current: AC 16A for 10 sec.
- Connection: Screw terminals.
- Housing: Plastic, UL 94V-0, light grey.
- Dimensions: 1.85 x 1.3 x 1.3 inches (47 x 33 x 33 mm).
- Weight: Approx. 1.2 oz. (34.75 g).
- Protection Type: IP20.
- Approvals: UL File No. E164102, VDE, EAC.
Features:
- Tamperproof Design: Pre-set thermostat.
- Compact Design: Small size for easy installation.
- Fixed Set Point: Ensures consistent operation.
- DIN Rail Mountable: Easy to mount on standard DIN rails.
- High Switching Accuracy: Reliable temperature control.
- Colour Coded Modules: Red module housing for NO operation.
- Wide Operating Temperature Range: -40 to +176 °F (-40 to +80 °C).
- High Humidity Tolerance: Max. 95% RH (non-condensing).
| Brand | Stego |
|---|
Write Your Own Review
Write your content here...
