Back to Top
FZK 011 Mechanical Thermostat, AC 120 V, +5 to +60 °C
Pricing available on request
FZK 011 Mechanical Thermostat for Panels:
- The mechanical thermostat is used to operate heating and cooling systems, filter fans, and signal devices.
- The thermostat senses the ambient air and may switch between inductive and resistive loads using a snap-action contact.
- The temperature setting on the scale equals the higher switch point, indicating that the NC contact is open.
- The temperature setting minus the switch temperature differential (and tolerances) equals the lower switch point, indicating that the NC contact shuts.
Specifications:
- Voltage: 120 VAC.
- Scale / Range: 50 to 140 ºF.
- Contact Type: SPDT / Change-over.
- Sensor Element: Thermostatic bimetal.
- Switching Difference (Hysteresis): Approx. 9 ºF (5 K), reduced with RF.
- Contact Resistance: < 10 mΩ.
- Max. Switching Capacity:
- Break contact: 10 A res./4 A ind. at 120 VAC.
- Make contact: 5 A res./2 A ind. at 120 VAC.
- DC: 30 W.
- EMI/EMC Compliance: EN 55014-1-2, EN 61000-3-2, EN 61000-3-3.
- Connection: 4-pole terminal for AWG 14 max. (2.5 mm²).
- Mounting: Clip for 35 mm DIN rail (EN 60 715).
- Dimensions (H x W x D): 2.64 x 1.97 x 1.5 inches (67 x 50 x 38 mm).
- Housing: Plastic, UL 94V-0, light grey.
- Weight: 2.74 oz (77.7 g).
- Operating Temperature: -49 to 149 ºF (-45 to 65 ºC).
- Storage Temperature: -49 to 149 ºF (-45 to 65 ºC).
- Protection Type: IP20.
Features:
- Mechanical Adjustable Thermostat: Used for controlling heating and cooling equipment, filter fans, or signal devices.
- High Sensing Accuracy: Ensures precise temperature control.
- Integrated Resistor (RF): Can be connected to improve the switch temperature difference.
- Snap-Action Contact: Allows switching of both inductive and resistive loads.
- UL Approved: Meets safety and performance standards.
| Brand | Stego |
|---|
Write Your Own Review
Write your content here...
