ZR 011 Dual Thermostat, Contact breaker (NC), 0°C to +60°C, Thermostat Set Point

ZAR 0.00

Out of stock

SKU

01172.0-01

Pricing available on request

Two thermostats in one enclosure.
Thermostat (contact breaker, generally closed) for controlling heaters.
An increase in temperature causes the contact to open.
The thermostat (contact maker, generally open) is used to regulate filter fans and heat exchangers, as well as to switch signal devices when the temperature limit is surpassed.
An increase in temperature causes the contact to close.
Unlike traditional change-over contacts, heaters and cooling equipment can be switched independently of one another using a temperature offset.

Thermostat Set Point: 0°C to +60°C.
Contact Rating: 10A at 250VAC.
Contact Operation: Normally Open (NO) and Normally Closed (NC).
Load Type: Resistive.
Mounting: DIN Rail.
Sensor Element: Thermostatic bimetal.
Contact Type: Snap-action contact.
Service Life: >100,000 cycles.
Max. Switching Capacity: 10A resistive / 2A inductive @ AC 250V (NC), 5A resistive / 2A inductive @ AC 250V (NO), DC 30W.
Max. Inrush Current: AC 16A for 10 sec.
Connection: Screw terminals.
Housing: Plastic, UL 94V-0, light grey.
Dimensions: 2.6 x 2.0 x 1.8 inches (67 x 50 x 46 mm).
Weight: Approx. 3.4 oz (95.87 g).
Protection Type: IP20.
Approvals: UL, CSA, VDE.

Dual Adjustable Thermostat: Houses two separate thermostats for independent control of heating and cooling.
Tamperproof Design: Pre-set thermostat.
Compact Design: Small size for easy installation.
Fixed Set Point: Ensures consistent operation.
DIN Rail Mountable: Easy to mount on standard DIN rails.
High Switching Accuracy: Reliable temperature control.
Colour Coded Modules: Red temperature dial for NC operation, blue temperature dial for NO operation.
Wide Operating Temperature Range: -40 to +176 °F (-40 to +80 °C).
High Humidity Tolerance: Max. 95% RH (non-condensing).

More Information
Brand	Stego

Write Your Own Review

Write your content here...

Compare Products

You have no items to compare.