ZR 011 Dual Thermostat, Contact breaker (NC), 0°C to +60°C Thermostat Set Point

ZAR 0.00
Out of stock
SKU
01172.0-00

Pricing available on request

ZR 011 Panel Dual Thermostat:

  • Two thermostats in one enclosure
  • Thermostat (contact breaker, generally closed) for controlling heaters.
  • An increase in temperature causes the contact to open.
  • The thermostat (contact maker, generally open) is used to regulate filter fans and heat exchangers, as well as to switch signal devices when the temperature limit is surpassed.
  • An increase in temperature causes the contact to close.
  • Unlike traditional change-over contacts, heaters and cooling equipment can be switched independently of one another using a temperature offset.

Specifications:

  • Thermostat Set Point: 0°C to +60°C.
  • Contact Rating: 5A at 250VAC (NO), 10A at 250VAC (NC).
  • Contact Operation: Normally Open (NO) and Normally Closed (NC).
  • Load Type: Resistive.
  • Mounting: DIN Rail.
  • Sensor Element: Thermostatic bimetal.
  • Contact Type: Snap-action contact.
  • Service Life: >100,000 cycles.
  • Max. Switching Capacity: 10A resistive / 2A inductive @ AC 250V (NC), 5A resistive / 2A inductive @ AC 250V (NO), DC 30W.
  • Max. Inrush Current: AC 16A for 10 sec.
  • Connection: 4-pole terminal for AWG 14 max. (2.5 mm²).
  • Housing: Plastic, UL 94V-0, light grey.
  • Dimensions: 2.6 x 2.0 x 1.8 inches (67 x 50 x 46 mm).
  • Weight: Approx. 3.2 oz (90 g).
  • Protection Type: IP20.
  • Approvals: UL, CSA, VDE.

Features:

  • Dual Adjustable Thermostat: Houses two separate thermostats for independent control of heating and cooling.
  • Tamperproof Design: Pre-set thermostat.
  • Compact Design: Small size for easy installation.
  • Fixed Set Point: Ensures consistent operation.
  • DIN Rail Mountable: Easy to mount on standard DIN rails.
  • High Switching Accuracy: Reliable temperature control.
  • Colour Coded Modules: Red temperature dial for NC operation, blue temperature dial for NO operation.
  • Wide Operating Temperature Range: -40 to +176 °F (-40 to +80 °C).
  • High Humidity Tolerance: Max. 95% RH (non-condensing).
More Information
Brand Stego
Write Your Own Review
You're reviewing:ZR 011 Dual Thermostat, Contact breaker (NC), 0°C to +60°C Thermostat Set Point
Write your content here...
Back to Top