Back to Top
12-inch display 800 x 600, numeric keyboard, with touch screen CP6621-0001-0020
Device type Built-in Panel PC
Housing aluminum front with sheet-steel rear cover stainless steel housing with flush mounted touch screen at 12", 15" and 19" display without front keyboard
Slots for hard disk/flash 1 slot for microSD
Installation pull-out clamping levers for fast installation without loose parts
Protection rating front side IP65, rear side IP20
Operating temperature 0…55 °C
Display size/resolution 5.7" 640 x 480, 6.5" 640 x 480, 12" 800 x 600, 15" 1024 x 768 or 19" 1280 x 1024
Touch screen single-finger touch screen or touch pad
Front keyboard alphanumerical or numerical PC keyboard in US layout or only function keys, each variant with 10 PLC special keys and LEDs or front laminate without keys, only display
Processor ARM Cortex™-A8, 1 GHz (TC2, TC3: 30)
Motherboard 3½-inch motherboard
Memory 1 GB DDR3 RAM
Graphic adapter integrated in the processor
Ethernet 1 x 10/100BASE-T on-board
EtherCAT 1 x on-board
Hard disks/flash 512 MB microSD up to 8 GB microSD
Persistent memory 128 kByte NOVRAM
Interfaces 2 x USB 2.0, 1 x RS232
Power supply 24 V DC 1-second UPS
Operating system Windows Embedded Compact 7, English
The built-in Panel PCs of the CP66xx series are designed for installation in the front of a control cabinet or control housing. They have a wide range of uses including remote desktop display. They are available in five different sizes as 5.7-, 6.5-, 12-, 15- or 19-inch display.
Scalable performance
CP66xx Panel PCs are equipped with an ARM Cortex™-A8 processor. They are equipped with a microSD card and have no rotating parts.
Highest data availability and data security
CP66xx are supplied with a 24 V power supply unit, optionally also with a capacitive uninterruptible power supply (1-second UPS).
Accessibility of the components
The microSD card and the lithium battery of the system clock are accessible from the rear in the connector bracket.
Central EtherCAT control
These devices are ideally suited as small controllers for machine construction and plant engineering applications in conjunction with TwinCAT automation software under Windows Embedded Compact 7.
Due to its independent Ethernet and EtherCAT interfaces the CP66xx is ideally suited as a compact central processing unit for an EtherCAT control system. NOVRAM for fail-safe data storage is integrated on the motherboard.
Write Your Own Review
Write your content here...
