Back to Top
19-inch slide-in Industrial PC
Device type: 19-inch slide-in Industrial PC
Housing: stainless steel based housing, 4 high units, with lockable front flap
5¼-inch slots: 3, 6
Front flap: lockable, includes 2 x USB 2.0, reset key and ATX key, 5¼-inch slots
Protection rating: front side IP50, rear side IP20
Operating temperature: 0-55 °C
Dimensions (W x H x D): 482 x 177 x 511 mm (19" x 7" x 20.1"), depth behind front 469 mm (18.5")
Processor: Intel® Celeron® G3900 2.8 GHz, 2 cores (TC2, TC3:50), up to Intel® Core™ i7 7700 3.6 GHz, 4 cores (TC3:80)
Motherboard: ATX motherboard for 6th/7th generation Intel® Celeron®, Pentium®, Core™ i3/i5/i7
PCIe/PCI slots: 2 x PCIe-x1, 2 x PCIe-x4, 1 x PCIe-x16, 2 x PCI for full-length plug-in cards
Memory: 4 GB DDR4 RAM, up to 64 GB DDR4 RAM
Graphic adapter: integrated in the processor
Ethernet: 2 x 100/1000BASE-T on-board
RAID: on-board SATA RAID 1 controller
Hard disks/flash: hard disk, 3½-inch, 1 TB, hard disk up to 4 TB, SSD, CFast
Disk drive: multi DVD
Interfaces: 4 x USB 3.0, 2 x DVI, 1 x DisplayPort, 1 x RS232, PS/2 keyboard and mouse, 8 x USB 2.0, 3 x RS232
Power supply: 100-240 V AC, 24 V DC, UPS
Operating system: Windows 7, Windows Embedded Standard 7, Windows 10 IoT Enterprise
The C5xxx Industrial PCs series is designed for 19-inch slide-in installation. They are equipped with maximum performance class components and are ideally suited for machine construction and plant engineering applications, for example with the TwinCAT automation software.
Industrial design and scalable portfolio
The C5240 Industrial PC expands the Industrial PC series by a version with four height units and seven PCI and PCIe plug-in card slots in 24 V DC or 110 to 230 V AC versions. The basic configuration includes three 5¼-inch drive bays behind the front flap. As an option, three additional 5¼-inch drive bays are available ex factory. It is designed for installation in a 19-inch rack and is equipped with components of the highest performance class according to the ATX standard.
A Beckhoff industrial motherboard is used with Intel® Celeron®, Intel® Pentium® or Intel® Core™ i3/i5/i7 processors of the newest generation. From the 7th generation a Windows 10 64 bit is required as operating system. With the 6th generation of Intel® Core™ processors, Windows 7 32 bit or 64 bit can be used as well.
The C5240 is ideally suited for use in machine and plant engineering, for example with TwinCAT automation software.
Write Your Own Review
Write your content here...
