Basic unit SIMOCODE pro V, MODBUS RTU, 57.6 Kbit/s, 110-240 V AC/DC

Description:
•The variable and intelligent motor management system offers the possibility of implementing a large number of control functions, e.g. for pole-changing starters or positioner control, and functions independently of the automation system.
•In interaction with various expansion modules, it provides an extensive range of inputs/outputs, voltage and power recording, fail-safe disconnection of motors, precise ground-fault detection via the 3UL23 residual-current transformers, analog value monitoring and temperature measurement.
•Depending on the version, a wide variety of communication interfaces such as PROFIBUS, PROFINET, OPC UA, Modbus RTU or EtherNet/IP are possible.
•The system supplies detailed operational, service and diagnostics data – at any time or place.
•Worldwide approvals (e.g. IEC and UL/CSA), also for applications in hazardous areas (ATEX or IEC Ex) are available.
•Deployment with IE3/IE4 motors is supported.
•The SIMOCODE ES (TIA Portal) software is available for the configuration, commissioning, operation and diagnostics of SIMOCODE pro.
•The SIMOCODE pro block library for SIMATIC PCS 7 is used for the simple integration of SIMOCODE pro into the SIMATIC PCS 7 process control system.
•The SIMOCODE pro V basic units are available with 24 V DC or 110-240 V AC/DC control supply voltage.
•The operation requires at least one current/voltage measuring module and a matching 3UF793 connecting cable.
•These optional operator panels with or without a display, as well as various expansion modules, are available separately.
•Take a step into the future with SIMOCODE pro.