Back to Top
Compact integrated servo drive AMI8131-4000-2x10
The integrated AMI8131 servo drive combines servomotor, output stage and fieldbus connection in a space-saving design in the voltage range of < 48 V DC. It is suitable for all motion requirements in the power range up to 400 W. The standstill torque of the motor is 1.25 Nm. The integrated servo drive with flange code F3 (72 mm) and motor length 1 has a shaft diameter b = 14 k6 and a free shaft end of d = 30 mm.
Motor type: permanent magnet-excited three-phase synchronous motor with integrated servo drive
Nominal voltage: 24…48 V DC
Standstill torque: 1.25 Nm
Rated torque: 1.2 Nm
Peak torque: 2.88 Nm
Rated speed: 1800 min-1
Rated power: 0.24 kW
Rotor moment of inertia: 0.462 kgcm²
System bus: EtherCAT
Drive profile: MDP profile, DS402 profile
Safe stop functions: Safe Torque Off (STO), Safe Stop 1 (SS1)
Safety standard: EN 61508-1-3: 2010 (up to SIL 3), IEC 62061: 2021 (maximum SIL 3), EN ISO 13849-1: 2015 (up to Cat 4, PL e) and EN 61800-5-2: 2017
Realization STO: by local TwinSAFE Logic or by FSoE
Connection technology: M12, l-coded/M8, screw type, 3-pin, a-coded/M8, screw type, 4-pin, a-coded
Ambient temperature (operation): +5…+40 °C
Approvals/markings: CE, cURus, EAC (only for products without TwinSAFE)
Protection rating: IP54, IP65 (shaft seal)
Design form: flange-mounted according to IM B5, IM V1, IM V3
Material: aluminium
Coating/surface: dark grey powder coating, similar to RAL7016
| SKU | AMI8131-4000-2x10 |
|---|
Write Your Own Review
Write your content here...
