Double door Mild Steel Wall mounting Enclosure MAD0608030R5

ZAR 0.00

Out of stock

SKU

MAD0608030R5

Pricing available on request

When installing in cramped places, where a single door would take up unnecessary room in front of the enclosure when opened, the mild steel double door wall-mounted enclosure range, MAD, is perfect.
As it is divided between two doors, the loading capacity of the doors also increases.
The enclosure's components are adequately secured thanks to its IP 55 protection level, which makes it suitable for a wide range of applications.

Material: Mild steel, 1.5 mm in the body.
Mild steel, 1.4 mm thick gland plate.
Door: mild steel, 2 mm
Mounting plate: 2 mm galvanized steel or 2.5 mm MAD1001030R5 and higher.
Body: Seam welded and folded.
Air circulation is facilitated around the rear part of the enclosure by four 8.5 mm diameter wall fixing holes that are pressed out in 20.4 mm diameter × 2 mm depressions.
Door: 130° opening, surface mounted.
Concealed, detachable hinges with a captive pin.
Door profiles MMDP are mounted using inner M6 welded studs.
The right door has two detachable mounting profiles, and the left door has two.
An injected one-piece polyurethane gasket ensures sealing.
Double-bit customized lock for simple door opening.
90° movement and a 3 mm insert in the double bit.
Espagnolette is locked with three points.
Additional inserts can be purchased as an accessory.
The mounting plate has vertical markings spaced 10 mm apart to make equipment installation horizontally simple.
To make cable fixing easier, there are holes on both the top and bottom.
Fixed to M8 press-welded studs at the enclosure's rear.
From 800 mm upwards, folded edges reinforce every side.

More Information
Brand	nVent HOFFMAN

Write Your Own Review

Write your content here...

Compare Products

You have no items to compare.