Back to Top
Double door Mild Steel Wall mounting Enclosure MAD0801230R5
Description:
- When installing in cramped places, where a single door would take up unnecessary room in front of the enclosure when opened, the mild steel double door wall-mounted enclosure range, MAD, is perfect.
- As it is divided between two doors, the loading capacity of the doors also increases.
- The enclosure's components are adequately secured thanks to its IP 55 protection level, which makes it suitable for a wide range of applications.
Features:
- Material: Mild steel, 1.5 mm in the body.
- Mild steel, 1.4 mm thick gland plate.
- Door: mild steel, 2 mm
- Mounting plate: 2 mm galvanized steel or 2.5 mm MAD1001030R5 and higher.
- Body: Seam welded and folded.
- Air circulation is facilitated around the rear part of the enclosure by four 8.5 mm diameter wall fixing holes that are pressed out in 20.4 mm diameter × 2 mm depressions.
- Door: 130° opening, surface mounted. concealed, detachable hinges with a captive pin.
- Door profiles MMDP are mounted using inner M6 welded studs.
- The right door has two detachable mounting profiles, and the left door has two.
- An injected one-piece polyurethane gasket ensures sealing.
- Double-bit customized lock for simple door opening.
- 90° movement and a 3 mm insert in the double bit.
- Espagnolette is locked with three points.
- Additional inserts can be purchased as an accessory.
- The mounting plate has vertical markings spaced 10 mm apart to make equipment installation horizontally simple.
- To make cable fixing easier, there are holes on both the top and bottom.
- Fixed to M8 press-welded studs at the enclosure's rear.
- From 800 mm upwards, folded edges reinforce every side.
- With the AMG attachment, the mounting plate location can be adjusted to any depth.
- To facilitate cabling onto the mounting plate, the gland plate opening is located at the rear of the enclosure.
- IP 55 | TYPE 12 | IK 10 protection.
- It is advised to utilize a rain hood, an ARF, a 100% polyester paint covering, and a corrosion-protective primer for outdoor installations.
- Both interior and outdoor applications require consideration of corrosion resistance.
- Finish: Powder coating with structure in RAL 7035.
- Delivery: A mounting plate and doors-equipped enclosure (not included for item numbers ending in PER5).
- Every door has two door mounting profiles.
- Mounting accessories, metallic double-bit 3 mm key, and gland plate(s) with gasket(s).
- Facility earthing.
Specifications:
- Hight: 800mm
- Width: 1200mm
- Depth: 300mm
- Material: mild steel
- Latch quantity: 1
- Cable entry: 510 x 96mm
- Cable quantity: 2
- Finish: powder coated
- Colour: light grey
- Colour code: RAL 7035
- Body thickness: 1.5mm
- Door thickness: 2mm
- Panel size: 770 x 1150mm
- Weight: 63.9 kg
| Brand | nVent HOFFMAN |
|---|
Write Your Own Review
Write your content here...
