When installing in cramped places where a single door would take up excessive room in front of the enclosure when opened, the mild steel double door wall-mounted enclosure range, MAD, is perfect.
As it is split between two doors, the loading capacity of the doors also rises.
The enclosure's components are well-protected and well-suited for a wide range of applications thanks to its IP 55 protection degree.
Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above.
Body: Folded and seam welded.
Air circulation is facilitated around the rear portion of the enclosure by four 8.5 mm-diameter wall fixing holes that are pressed out in 20.4 mm-diameter × 2 mm-diameter depressions.
Door: 130° opening, surface mounted.
Hidden detachable hinges using a captive pin.
Door profiles (MMDP) are mounted using inner M6 welded studs.
The right door has two replaceable mounting profiles, as does the left door.
An injected, one-piece polyurethane gasket ensures sealing.
Lock: Double-bit customized lock for simple door opening.
90° movement and a 3 mm insert in the double bit.
Espagnolette is locked with three points.
Additional inserts can be purchased as an accessory.
Mounting plate: To facilitate simple horizontal equipment location, the mounting plate has vertical markings placed 10 mm apart.
To make cable fixing easier, there are holes on both the top and bottom.
Fixed to M8 press-welded studs at the enclosure's back. From 800 mm forward, folded edges reinforce every side.
The mounting plate location can be changed to any depth using the AMG attachment.
To facilitate cabling onto the mounting plate, the gland plate opening is located at the very rear of the enclosure.