Back to Top
EJ3068 EtherCAT plug-in module
The EJ3068 EtherCAT plug-in module processes signals in the range between 0 and 10 V. The voltage is digitized with a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The module combines eight channels in one housing. The signal state is indicated by light emitting diodes.
Technology: 0…10 V
Number of inputs: 8 (single-ended)
Power supply: via the E-bus
Technology: single-ended
Signal voltage: 0…10 V
Internal resistance: > 130 kΩ
Input filter limit frequency: 1 kHz
Conversion time: typ. 1.25 ms default setting, configurable
Resolution: 12 bit (16 bit presentation)
Measurement error/ uncertainty: < ±0.3 % (relative to full scale value)
Electrical isolation: 500 V (E-bus/field potential)
Current consumption E-bus: typ. 130 mA
Dielectric strength: max. 30 V
Special features: activatable FIR/IIR filters, limit value monitoring
Weight: approx. 30 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Relative humidity: 95 %, no condensation
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos.: IP20/see documentation
Approvals/markings: CE
Write Your Own Review
Write your content here...
