Back to Top
EJ4002 EtherCAT plug-in module
The EJ4002 EtherCAT plug-in module generates signals in the range between 0 and 10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels have a common ground potential. The module combines two channels in one housing. The output stages are powered by the 24 V supply. The signal state is indicated by light emitting diodes.
Technology: 0…10 V
Power supply: via the E-bus
Number of outputs: 2
Signal voltage: 0…10 V
Distributed clocks: yes
Load: > 5 kΩ (short-circuit proof)
Measurement error/ uncertainty: < 0.1 % (relative to full scale value)
Output error: < ±0.1 % (relative to end value)
Resolution: 12 bit
Electrical isolation: 500 V (E-bus/signal voltage)
Conversion time: ~ 150 µs
Auxiliary power current: typ. 20 mA
Current consumption E-bus: typ. 90 mA
Special features: Optional watchdog: user-specific output value with ramp; user synchronization can be activated.
Dimensions (W x H x D): approx. 12 mm x 66 mm x 55 mm
Weight: approx. 30 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP20/see documentation
Approvals/markings: CE, UL
Write Your Own Review
Write your content here...
