Back to Top
EJ4004 EtherCAT plug-in module
The EJ4004 EtherCAT plug-in module generate signals in the range between 0 and 10 V. The voltage is supplied to the process level with a resolution of 12 bit and is electrically isolated. The output channels have a common ground potential. The module combines four channels in one housing. The output stages are powered by the 24 V supply. The signal state is indicated by light emitting diodes.
Technology: 0…10 V
Connection technology: 1-wire, single-ended
Number of outputs: 4
Supply voltage electronics: 24 V DC (via distribution board)
Signal voltage: 0…10 V
Distributed clocks: yes
Distributed clock precision: << 1 µs
Load: > 5 kΩ (short-circuit proof)
Measurement error/ uncertainty: < 0.1 % (relative to full scale value)
Output error: < ±0.1 % (relative to end value)
Resolution: 12 bit
Electrical isolation: 500 V (E-bus/signal voltage)
Conversion time: ~ 400 µs
Auxiliary power current: typ. 25 mA
Current consumption E-bus: typ. 90 mA
Special features: Optional watchdog: user-specific output value with ramp; user synchronization can be activated.
Weight: approx. 30 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP20/see documentation
Approvals/markings: CE
Write Your Own Review
Write your content here...
