Back to Top
EJ4024 EtherCAT plug-in module
The EJ4024 EtherCAT plug-in module generates signals in the range between 4 and 20 mA. The power is supplied to the process level with a resolution of 12 bits and is electrically isolated. Ground potential for the output channels is common with the 24 V DC supply. The output stages are powered by the 24 V supply. The signal state is indicated by light emitting diodes.
Technology: 4…20 mA
Connection technology: 2-wire, single-ended
Number of outputs: 4
Supply voltage electronics: 24 V DC (via distribution board)
Signal current: 4…20 mA
Distributed clocks: yes
Distributed clock precision: << 1 µs
Load: < 350 Ω (short-circuit proof)
Output error: < ±0.1 % (relative to end value)
Resolution: 12 bit
Electrical isolation: 500 V (E-bus/field potential)
Conversion time: ~ 250 µs
Current consumption periphery: typ. 25 mA
Current consumption E-bus: typ. 90 mA
Special features: Optional watchdog: user-specific output value with ramp; user synchronization can be activated.
Dimensions (W x H x D): 12 mm x 66 mm x 55 mm
Weight: approx. 30 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP20/see documentation
Approvals/markings: CE
Write Your Own Review
Write your content here...
