Back to Top
EL2014 EtherCAT Terminal
The EL2014 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. The EtherCAT Terminal contains four channels that indicate its signal state by means of light emitting diodes.
Connection technology: 2-wire
Number of outputs: 4
Nominal voltage: 24 V DC (-15 %/+20 %)
Load type: ohmic, inductive, lamp load
Max. output current: 0.5 A (short-circuit proof) per channel
Short-circuit current: typ. < 1 A
Reverse voltage protection: yes
Breaking energy : < 150 mJ/channel
Switching times: typ. TON: 50 µs, typ. TOFF: 100 µs
Current consumption E-bus: typ. 60 mA
Electrical isolation: 500 V (E-bus/field potential)
Current consumption power contacts: typ. 15 mA + load
Bit width in the process image: 4 bit output, 20 bit diagnositcs
Configuration: via TwinCAT System Manager
Special features: diagnostics via process data and LED: overtemperature, PowerFail, short circuit (per channel)
Weight: approx. 70 g
Operating/storage temperature: 0…+55 °C/-25…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP20/variable
Pluggable wiring: for all ESxxxx terminals
Approvals/markings: CE, ATEX, IECEx, cFMus
Ex marking: ATEX: II 3 G Ex nA IIC T4 Gc/ IECEx: Ex ec IIC T4 Gc/ cFMus: Class I, Division 2, Groups A, B, C, D, Class I, Zone 2, AEx ec IIC T4 Gc
Write Your Own Review
Write your content here...
