Back to Top
EL2202-0100 EtherCAT Terminal
The EL2202/EL2202-0100 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. This terminal benefits from very small output delay and is therefore suitable for signals requiring particularly fast output.Has Distributed clocks.
Connection technology: 4-wire
Number of outputs: 2
Nominal voltage: 24 V DC (-15 %/+20 %)
Load type: ohmic, inductive, lamp load
Distributed clocks: yes
Distributed clock precision: << 1 µs
Max. output current: 0.5 A (short-circuit proof in push operation) per channel
Output stage: push-pull, high-ohmic
Short-circuit current: typ. 4 A/150 µs
Reverse voltage protection: yes
Breaking energy : < 150 mJ/channel
Switching times typ.: TON: < 1 µs, typ. TOFF: < 1 µs
Current consumption E-bus: typ. 130 mA
Electrical isolation: 500 V (E-bus/field potential)
Current consumption power contacts: typ. 30 mA + load
Bit width in the process image: 2 x 2 bit output
Configuration: no address or configuration setting
Special features: DC preset, outputs connectable in high-resistance mode
Weight: approx. 60 g
Operating/storage temperature: 0…+55 °C/-25…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP20/variable
Approvals/markings: CE, UL, ATEX
Ex marking: II 3 G Ex nA IIC T4 Gc
Write Your Own Review
Write your content here...
