Back to Top
EL2212 EtherCAT Terminal
The EL2212 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. The multi-timestamp features allow each EtherCAT cycle to capture as many events per channel as were preloaded in the internal buffer.
Connection technology: 4-wire
Number of outputs: 2
Nominal voltage: 24…72 V DC (-15 %/+0 %)
Load type: inductive > 1 mH
Precision of timestamp in the terminal: 10 ns
Resolution timestamp: 1 ns
Distributed clocks: yes
Distributed clock precision: << 1 µs
Max. output current: peak current: max. 10 A per channel, holding current: 0.2…2.5 A per channel
Output stage: full bridge (push-pull)
Short-circuit current: typ. 12 A
Switching times without distributed clocks: typ. TON/TOFF 20 µs, with distributed clocks: typ. TON/TOFF < 1 µs via internal compensation
Current consumption E-bus: typ. 120 mA
Electrical isolation: 500 V (E-bus/field potential)
Current consumption power contacts: load-dependent
Configuration: via TwinCAT System Manager
Special features: Multi-timestamping, current-controlled outputs can be connected in high-resistance mode.
Weight: approx. 50 g
Operating/storage temperature: 0…+55 °C/-25…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP20/variable
Pluggable wiring: for all ESxxxx terminals
Approvals/markings: CE
Write Your Own Review
Write your content here...
