EP2008-0002 EtherCAT Box

ZAR 0.00
Out of stock
SKU
EP2008-0002
The EP2008-0002 EtherCAT Box is intended for processing digital/binary signals. It switches the binary control signals from the automation device to the actuators at the process level. The outputs process an output current of up to max. 0.5 A. A short-term overload is possible. The outputs are short-circuit proof. The total current of all outputs is limited to 4 A.
Protocol: EtherCAT Bus interface: 2 x M8 socket, shielded, screw type Number of outputs: 8 Output connections: M12, screw type Load type: ohmic, inductive, lamp load Nominal output voltage: 24 V DC (-15 %/+20 %) Max. output current: 0.5 A (short-circuit proof) per channel Switching times: typ. TON: 50 µs, typ. TOFF: 100 µs Short-circuit current: typ. 1.5 A Current consumption from US: 120 mA Auxiliary power current: typ. 20 mA + load Power supply connection: feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin Electrical isolation: 500 V Weight: approx. 165 g Operating/storage temperature: -25…+60 °C/-40…+85 °C Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4 Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable Approvals/markings: CE, UL, ATEX Ex marking: II 3 G Ex nA IIC T4 Gc
Write Your Own Review
You're reviewing:EP2008-0002 EtherCAT Box
Write your content here...
Back to Top