Back to Top
EP2624-0002 EtherCAT Box
The EP2624-0002 EtherCAT Box has four relays, each with one contact, which can be controlled potential-free by the PLC via EtherCAT. The relay contacts can each be used up to 25 V AC or 30 V DC. The signal status of the individual channels is indicated by LEDs.
Protocol: EtherCAT
Bus interface: 2 x M8 socket, shielded, screw type
Number of outputs: 4 x make contacts
Ohmic switching current: 0.5 A AC/2 A DC per channel
Output connections: M12, screw type
Minimum permitted load: 10 µA at 10 mV DC
Load type: ohmic, inductive, lamp load
Nominal output voltage: 25 V AC/30 V DC
Current consumption from US: 200 mA
Power supply connection: feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Operating cycles mech. (min.): 1 x 108
Operating cycles electr. (min.): 2 x 105 (1 A/30 V DC)
Electrical isolation: 500 V
Special features: potential-free switching
Weight: approx. 165 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL, ATEX
Ex marking: II 3 G Ex nA IIC T4 Gc
Write Your Own Review
Write your content here...