Back to Top
EP2839-0042 EtherCAT Box
The EP2839-0042 EtherCAT Box is intended for processing digital/binary signals. It switches the binary control signals from the automation device to the actuators at the process level. The 16 outputs each process an output current of up to max. 0.5 A. A short-term overload is possible. The outputs are short-circuit proof. The total current of all outputs is limited to 16 A.
Protocol: EtherCAT
Bus interface: 2 x M12 socket, 4-pin (D-coded)
Number of outputs: 16
Output connections: M12, screw type
Load type: ohmic, inductive, lamp load up to max. 12 W
Nominal output voltage: 24 V DC (-15 %/+20 %)
Max. output current: 0.5 A per channel, individually short-circuit proof, ∑ 16 A
Switching times: typ. TON: 50 µs, typ. TOFF: 100 µs
Short-circuit current: max. 1.5 A
Distributed clocks: yes
Current consumption from US: typ. 130 mA
Auxiliary power current: typ. 20 mA + load
Diagnostics: short circuit, open load detection, undervoltage
Power supply connection: feed: 1 x 7/8" plug, 5-pin; downstream connection: 1 x 7/8" socket, 5-pin
Electrical isolation: 500 V
Weight: approx. 440 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL in preparation
Write Your Own Review
Write your content here...
