EP3204-0002 EtherCAT Box

ZAR 0.00
Out of stock
SKU
EP3204-0002
The EP3204-0002 EtherCAT Box with analog inputs allows resistance sensors to be connected directly. The module’s circuitry can operate the sensors using 2-, 3- or 4-wire connection techniques. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely.
Protocol: EtherCAT Bus interface: 2 x M8 socket, shielded, screw type Number of inputs: 4 Connection method: screw type M12 for 2-, 3- and 4-wire connections, presetting: 2-wire Sensor types: Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, resistance measurement (e.g. potentiometer, 10 Ω…1.2/4 kΩ) Signal type: Pt100 Measuring range: -200…+850 °C (Pt sensors); -60…+250 °C (Ni sensors) Resolution: 0.1 °C per digit Measurement error/ uncertainty: < ±0.5 °C (Pt sensors in 4-wire connection) Conversion time: 800 ms up to 2 ms, see documentation, default: approx. 85 ms Nominal voltage: 24 V DC (-15 %/+20 %) Measuring current: typ. 0.5 mA Input filter: 5 variations, configurable Current consumption from US: 120 mA Power supply connection: feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin Electrical isolation: 500 V Special features: open-circuit recognition Operating/storage temperature: -25…+60 °C/-40…+85 °C Weight: approx. 165 g Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4 Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable Approvals/markings: CE, UL, ATEX Ex marking: II 3 G Ex nA IIC T4 Gc
Write Your Own Review
You're reviewing:EP3204-0002 EtherCAT Box
Write your content here...
Back to Top