Back to Top
EP4314-1002 EtherCAT Box
The EP4314-1002 EtherCAT Box combines two analog inputs, two analog outputs and two digital inputs which can be individually parameterized, so that they process/generate signals either in the ±10 or ±20 mA range. The resolution for the current signals is 16 bit.
Protocol: EtherCAT
Bus interface: 2 x M8 socket, shielded, screw type
Number of outputs: 2 (single-ended)
Number of inputs: 2 x analog (single-ended), 2 x digital
Input/output connections: M12, screw type
Signal type: ±10 mA, ±20 mA, 0…20 mA, 4…20 mA, parameterizable per channel
Nominal voltage: 24 V DC (-15 %/+20 %)
Load: output: < 500 Ω
Internal resistance: input: 85 Ω typ. + diode voltage
Resolution: 16 bit
Conversion time: input: ~ 100 µs, output: ~ 40 µs
Measurement error/ uncertainty: input: < 0.3 %, output: < 0.1 % (each relative to full scale value)
Actuator supply: from the auxiliary voltage UP
Power supply connection: feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Electrical isolation: 500 V
Current consumption from US: 120 mA
Special features: combi module, current parameterizable per channel
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL
Write Your Own Review
Write your content here...
