Back to Top
EP6224-0042 EtherCAT Box
The EP6224-0042 IO-Link module enables connection of up to four IO-Link devices, e.g. actuators, sensors or combinations of both. In addition, the EP6224-0042 offers further digital inputs on the four upper free M12 ports. A point-to-point connection is used between the box and the IO-Link device.
Protocol: EtherCAT
Bus interface: 2 x M12 socket, 4-pin (D-coded)
Data transfer rates: 4.8 kbaud, 38.4 kbaud and 230.4 kbaud
Specification version: IO-Link V1.1, Class A
IO-Link interfaces: 4
Connection method: M12, screw type
Number of inputs: 8 additional digital inputs
Nominal input voltage: 24 V DC (-15 %/+20 %)
Input filter: 10 µs
“0” signal voltage: -3…+5 V
“1” signal voltage: 11…30 V, 6 mA input current (EN 61131-2, type 3)
Input current: typ. 3 mA (EN 61131-2, type 3)
Nominal voltage: 24 V DC (-15 %/+20 %)
IO-Link sensor supply L+: 24 V DC, 1.4 A per port, ∑ 5.6 A for 4 ports
Current consumption from US: typ. 130 mA + load
Power supply connection: feed: 1 x 7/8" plug, 5-pin; downstream connection: 1 x 7/8" socket, 5-pin
Distributed clocks: yes
Electrical isolation: 500 V
Weight: approx. 440 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL in preparation
Write Your Own Review
Write your content here...
