Back to Top
EP6224-3022 EtherCAT Box
The EP6224-3022 IO-Link module enables connection of up to four IO-Link devices, e.g. actuators, sensors or combinations of both. A point-to-point connection is used between the terminal and the device. The module is parameterized via the EtherCAT master. IO-Link is designed as an intelligent link between the fieldbus level and the sensor, wherein parameterization information can be exchanged bidirectionally via the IO-Link connection.
Protocol: EtherCAT
Bus interface: 2 x M8 socket, shielded, screw type
Data transfer rates: 4.8 kbaud, 38.4 kbaud and 230.4 kbaud
Specification version: IO-Link V1.1, Class B
IO-Link interfaces: 4
Connection method: M12, screw type
Nominal voltage: 24 V DC (-15 %/+20 %)
IO-Link sensor supply L+ : 24 V DC, 1.4 A per port, ∑ 4.0 A for 4 ports
IO-Link extra power P24: 24 V DC, 2.0 A per port, ∑ 4.0 A for 4 ports
Current consumption from US: typ. 130 mA + load
Power supply connection: feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Distributed clocks: yes
Electrical isolation: 500 V
Weight: approx. 250 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL
Write Your Own Review
Write your content here...
