Back to Top
EP7402-0057 EtherCAT Box
The EP7402-0057 EtherCAT Box offers two outputs with integrated MDR controller for the direct connection of 24 V DC conveyor roller motors or other BLDC motors with max. 3.5 A. Eight additional digital inputs/outputs enable connection of e.g. photoelectric switches and communication between the box modules in operation without PLC. The EP7402-0057 takes over the complete control of a roller motor independently of the manufacturer of conveyor or motor.
Protocol: EtherCAT
Bus interface: 2 x B23 ENP, shielded, bayonet fitting
Technology: motor controller for roller conveyor systems
Number of channels: 2 motor rollers, 8 digital inputs or outputs, 1 EtherCAT junction with power transmission
Supply voltage electronics: 24 V DC (-15 %/+20 %)
Supply voltage power: 18…24 V DC
Output current (rms): 3.5 A
Peak current (rms): 12.0 A
Input/output connections: M8, screw type
Max. output current: 0.5 A/24 V DC per digital channel, individually short-circuit proof
Rated load voltage: 24 V DC (-15 %/+20 %)
“0” signal voltage: 0…9.6 V
“1” signal voltage: 10…30 V
Load type: BLDC
Rotating field frequency: 599 Hz
Sensor supply: from US, max. 0.5 A total, short-circuit proof
Power supply connection: feed: 1 x B23 ENP, 5G4; downstream connection: 1 x B23 ENP, 5G4, power transmission 30 A
Electrical isolation: 500 V
Current consumption from US: typ. 150 mA
Special features: compact integration, comprehensive current/voltage diagnostics
Weight: approx. 750 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL
Write Your Own Review
Write your content here...
