Back to Top
EPP1859-0022 EtherCAT P Box
The EPP1859-0022 EtherCAT P Box module combines eight digital inputs (four M12 sockets on the left) and eight digital outputs (four M12 sockets on the right) in a single device. The inputs have a filter of 3.0 ms; the outputs are capable of handling load currents of up to 0.5 A, are short circuit-proof, and protected against polarity reversal.
Protocol: EtherCAT
Bus interface: 2 x M8 socket, shielded, screw type, P-coded
Specification: EN 61131-2, type 1/3
Number of channels: 8 inputs + 8 outputs
Input/output connections: M12, screw type
Input filter: 3.0 ms
“0” signal voltage: -3…+5 V
“1” signal voltage: 11…30 V, 3 mA input current (EN 61131-2, type 1/3)
Sensor supply: from control voltage, max. 0.5 A, short-circuit proof in total
Load type: ohmic, inductive, lamp load
Rated load voltage: 24 V DC (-15 %/+20 %)
Max. output current: 0.5 A per channel, individually short-circuit proof, ∑ 3 A from UP
Switching times: typ. TON: 50 µs, typ. TOFF: 100 µs
Short-circuit current: typ. 1.5 A
Auxiliary power current: typ. 20 mA + load
Current consumption from US: 120 mA
Electrical isolation: 500 V
Special features: 8 fixed inputs/outputs
Weight approx.: 250 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, (UL in preparation)
Write Your Own Review
Write your content here...
