EPP3632-0001 EtherCAT P Box

ZAR 0.00
Out of stock
SKU
EPP3632-0001
The EPP3632-0001 EtherCAT P Box is a 2-channel oversampling interface for up to two IEPE sensors with 2-wire connection. The current of the integrated constant current source can be set to 2, 4 or 8 mA separately for each channel depending on the sensor and cable length.
Protocol: EtherCAT Bus interface: 2 x M8 socket, shielded, screw type, P-coded Technology: condition monitoring/IEPE Number of inputs: 2 Connection method: M8, 4-pin, screw type, shielded Signal voltage: IEPE constant current supply and recording of modulated AC voltage Sensor types: IEPE Sensor state monitoring: yes, through monitoring of the bias voltage Measuring range: default ±5 V up to 25 kHz, ±250 mV up to 10 Hz Resolution: 16 bit (incl. sign) Measurement error/ uncertainty: < ±0.5 % (DC; relative to full scale value) Conversion time: 20 μs (max. 50 ksamples/s) Input filter limit frequency: analog parameterizable 5th order low-pass filter up to 25 kHz, typically 0.05 Hz high-pass filter Nominal voltage: 24 V DC (-15 %/+20 %) Distributed clocks: yes Supply current IEXCITE: typ. 2/4/8 mA (separately configurable for both channels) Sensor supply: from control voltage US Electrical isolation: 500 V Special features: automatic anti-aliasing function, wire breakage detection Operating/storage temperature: -25…+60 °C/-40…+85 °C Weight: approx. 165 g Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4 Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable Approvals/markings: CE, UL
Write Your Own Review
You're reviewing:EPP3632-0001 EtherCAT P Box
Write your content here...
Back to Top