Back to Top
EPP6002-0002 EtherCAT P Box
The 1-channel version has an increased end device power supply of up to 1 A, the connector assignment depends on the selected interface. The two integrated digital inputs/outputs allow the connection of additional sensors/actuators in order, for example, to trigger the reading process of the barcode reader or, depending on the result, to initiate an action.
Protocol: EtherCAT
Bus interface: 2 x M8 socket, shielded, screw type, P-coded
Data transfer channels: 2
Interfaces: individually selectable from RS232, RS485, RS422
Data transfer rates: 300…115,200 baud; 9600 baud (8 bit, no parity, 1 stop bit) is preset
Bit distortion: < 3 %
Cable length: RS232: max. 15 m; RS422/RS485: approx. 1000 m
Data buffer: 864 bytes receive buffer, 128 bytes transmit buffer
Sensor supply: +5 V DC, 20 mA each
Connection method: M12, screw type
Number of channels: 2 (1/1), TxD and RxD, full duplex
Nominal voltage: 24 V DC (-15 %/+20 %)
Current consumption from US: typ. 100 mA
Electrical isolation: 500 V
Weight: approx. 165 g
Special features: easy integration of serial end devices
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL
Write Your Own Review
Write your content here...
