Back to Top
EPX1058-0022 EtherCAT Box
The EPX1058-0022 EtherCAT Box acquires signals from NAMUR field devices according to IEC 60947-5-6. The sensors are supplied with a voltage of 8.2 V and return a diagnosable current signal. In this way, a wire breakage or short circuit can be detected in addition to the switching state. The LEDs indicate signal or any error states, channel by channel.
Protocol: EtherCAT
Bus interface: 2 x M8 socket, shielded, screw type
Specification: NAMUR (IEC 60947-5-6)
Number of inputs: 8
Input connections: M12, screw type
Connection method: 2-wire
Open circuit voltage: typ. 8.2 V DC
“0” signal current: ≤ 1.2 mA
“1” signal current: ≥ 2.1 mA
Switching hysteresis: typ. 300 µA
Short-circuit current: typ. 7 mA
Fault detection: I ≤ 200 µA (cable break), I ≥ 6.3 mA (short circuit)
Max. switching frequency: 1 kHz
Sensor supply: from load supply voltage UP
Power supply connection: feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Current consumption from US: 50 mA
Special features: can be parameterized by channel: NAMUR NO/NC, potential-free contacts NO/NC
Weight: approx. 250 g
Operating/storage temperature: -25…+70 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL, ATEX, IECEx
Ex marking: ATEX: II 3(1)G Ex ec [ia Ga] IIC T4 Gc, II (1)D Ex tc [ia Da] IIIC T135 °C Dc, I (M1) [Ex ia Ma] I/ IECEx: Ex ec [ia Ga] IIC T4 Gc, Ex tc [ia Da] IIIC T135 °C Dc, [Ex ia Ma] I
Write Your Own Review
Write your content here...
