Back to Top
EtherCAT Box, 8-channel digital output, 24 V DC, 2 A, M12, TwinSAFE, TwinSAFE Logic EP2918-0032
The EP2918-0032 TwinSAFE component provides safe digital outputs in a module with IP67 protection (eight outputs for 24 V DC actuators up to 2 A). The signals are connected via M12 screw connectors. The outputs are controlled by a TwinSAFE Logic-capable component via FSoE. The EP2918-0032 has safety parameters to specifically adapt the functionality to the respective safety requirements (e.g. testing of the individual channels).
Protocol: TwinSAFE/Safety over EtherCAT
Bus interface: 2 x M8 socket, shielded, screw type
Specification: link unit between safe input and output signals
Connection technology: M12, screw type
Number of outputs: 8
Max. output current: 2 A
Response time: typ. 4 ms
Cycle time: approx. 1 ms/according to project size
Fault response time: ≤ watchdog time (parameterizable)
Current consumption from US/UP: max. 120 mA/max. 70 mA
Power supply connection: feed: 1 x 7/8" plug, 5-pin; downstream connection: 1 x 7/8" socket, 5-pin
Installation position: variable
Weight: approx. 470 g
Protection rating: IP67 (according to EN 60529)
Safety standard: EN ISO 13849-1: 2015 (Cat 4, PL e) and EN 61508: 2010 (SIL 1-3)
Dimensions (W x H x D): 60 mm x 150 mm x 26.5 mm
Material: PA6 (polyamide)
Installation: 2 fixing holes 3.5 mm diameter for M3; 2 fixing holes 4.5 mm diameter for M4
Write Your Own Review
Write your content here...
