Horizontal Single door Mild Steel Wall mounting Enclosure MAP0306030R5

ZAR 0.00

Out of stock

SKU

MAP0306030R5

Pricing available on request

Enclosures with a horizontally hinged door and top and bottom gland plate openings are part of the mild steel single-door wall-mounted MAP range, which has an IP 66 protection degree.
It is simple to combine any of these enclosures with another wall-mounted enclosure to create configurations that have two separate sections with independent access.
By keeping dust and water out of the enclosure, there is no longer any chance of a component failing and causing needless downtime.

Material: mild steel, 1.5 mm in the body.
Mild steel, 1.4 mm thick gland plate.
Door: mild steel, 1.5 mm MAP0308030R5 and above, or 2 mm MAP0306030R5.
Mounting plate: 2 mm thick steel, galvanized.
Body: seam-welded and folded.
Mounting plate: To facilitate simple horizontal equipment location, the mounting plate has vertical markings placed 10 mm apart.
To make cable fixing easier, there are holes on both the top and bottom.
Fixed to M8 press-welded studs at the enclosure's rear.
From 800 mm forward, folded edges reinforce every side.
Both the top and bottom of the gland plate are open.
Positioned at the rear of the enclosure to provide easy wiring onto the mounting plate.
Gaskets (AG) and gland plates (AF) are not supplied.
The gland plate from the MAS/MAD enclosure can be utilized with the MAP panel if it is to be coupled with one of these enclosures.
Protection: If the gland plate(s) and gasket(s), which are supplied as an accessory, are mounted, the mounted standalone complies with IP 66 | TYPE 4, 12 | IK 10.
In accordance with IP 55 | TYPE 12 when combined with MAS or MAD.

More Information
Brand	nVent HOFFMAN

Write Your Own Review

Write your content here...

Compare Products

You have no items to compare.