Back to Top
IE6002 Extension Box
The IE6002 serial interface module allows the connection of devices with an RS232 interface, which operates in conformity with the CCITT V.28/DIN 66 259-1 standards. The module transmits the data in a fully transparent manner to the higher-level automation device.
Data transfer channels: 2 (1/1), TxD and RxD
Data transfer rates: 1200…115,200 baud, 9600 baud (8 bits, no parity, 1 stop bit) is preset
RS232 connection: M12, screw type
Nominal voltage: 24 V DC (-15 %/+20 %)
Bit transfer: RS232 (EIA-232)
Bit distortion: < 3 %
Cable length: max. 15 m
“0” signal voltage: -18…+3 V
“1” signal voltage: 3…18 V
Data buffer: 128 bytes receive buffer, 16 bytes transmit buffer
Power supply connection: feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Current consumption: from US (without sensor current) 40 mA
Bit width in the process image: input/output: 3 x 8 bit user data, 1 x 8 bit control/status (up to 5 x 8 bit user data are possible)
Electrical isolation: RS232/control voltage: 500 V, to the fieldbus: yes, via IP-Link
Operating/storage temperature: 0…+55 °C/-25…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings: CE, UL
Write Your Own Review
Write your content here...