Back to Top
Impulse Distributor for Incremental Encoder with Potential Separation
Impulse Distributor for Incremental Encoder with Potential Separation (8 Outputs):
- The GV460 Impulse Distributor for Incremental Encoder with Potential Separation, 8 Output Signal Splitters has 8 compact and highly versatile distributors with a short-circuit-protected encoder supply and 8 outputs.
- It is appropriate for the distribution of signals from incremental encoders or measuring systems.
- The outputs can be cascaded to n x 8 (with no terminal loss).
- The input circuits of the outputs can potentially be separated.
- The outputs are galvanically connected to each other and the power supply.
- The devices' expanded temperature range of -4° to +140° F (20° to 60° C) makes them appropriate for usage in harsh climate conditions.
Features:
- One pulse input in the format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422].
- Select input for PNP signals (10–30 VDC).
- The input frequency is up to 200 kHz for HTL and 500 kHz for RS422/TTL.
- 8 push-pull outputs.
- Power supply: 10–30 VDC.
- Extended temperature range: -20°C to +60°C (-4°F to +140°F).
- Snap-on housing for the top hat rail (EN 60715).
- LEDs for indicating input pulses.
- W x H x D measurements = 72 x 144 x 61 mm (2.83 x 4.89 x 2.38'').
- Consumption (without encoder supply) is approximately 40 mA.
- input level: HTL asymmetrical (no inverted track) Low: <4 V, high: >10 V.
- Input level "Select": Low: <4 V, High: >10 V.
- Kaskadier-input A, B, Z, and Pegel 5 V [CMOS, low < 0.8 V, high > 3,5 V].
- Signal delay: 400 ns.
- Weight is approximately 400 g.
- Storage: -30° to +75° C (-22° to +167° F).
- Conformity and standards: EMV 2004/108/EG: EN 61000-6-2 and EN 61000-6-3.
| Brand | Motrona |
|---|
Write Your Own Review
Write your content here...
