Back to Top
Incremental encoder Through hollow shaft ø28 to ø30 mm
Through hollow shaft ø28 to ø30 mm:
- Encoder having a hollow shaft that is ø28–30 mm through.
- Maximum pulses per revolution: 10,000.
- Method of optical sensing.
- Torque support mounting.
- Signals for TTL or HTL output.
- Radial cable output.
Electrical ratings:
- Voltage supply: 5 VDC ±5 %, 8...30 VDC.
- Reverse polarity protection: Yes.
- Consumption w/o load: ≤100 Ma.
- Pulses per revolution: 1024 … 10000.
- Reference signal: Zero pulse, width 90°.
- Sensing method: Optical.
- Output frequency: ≤300 kHz (TTL), ≤160 kHz (HTL).
- Output signals: A, B, N + inverted.
- Output stages: TTL line driver (short-circuit proof), HTL push-pull (short-circuit proof).
- Interference immunity: EN 61000-6-2.
- Emitted interference: EN 61000-6-3.
Mechanical design:
- Size (flange): ø80 mm.
- Shaft type: ø28...30 mm (through hollow shaft).
- Mounting kit: 050.
- Protection EN 60529: IP 65.
- Operating speed: ≤5000 rpm, ≤3000 rpm IP 65 (>70 °C).
- Starting torque: ≤0.01 Nm (+20 °C).
- Material: Housing: aluminium, black, powder-coated, Shaft: stainless steel.
- Operating temperature: -20...+70 °C, -20...+100 °C.
- Relative humidity: 90 % non-condensing.
- Resistance: EN 60068-2-6, Vibration 10 g, 55-2000 Hz, EN 60068-2-27, Shock 30 g, 11 ms.
- Connection: Cable 1 m.
- Weight approx.: 580 g.
| Brand | Baumer Thalheim |
|---|
Write Your Own Review
Write your content here...
