Back to Top
Incremental encoder Through hollow shaft ø40 to ø65 mm, ITD 70 A 4 Y 9
Through hollow shaft ø40 to ø65 mm:
- Encoder with maximum Ø65 mm through hollow shaft.
- 2500 pulses each revolution at most.
- Method of optical sensing.
- Torque support mounting.
- Ø164 mm is the mounting hole circle.
- Signals for TTL or HTL output.
- Radial flange connector.
Electrical ratings:
- Voltage supply: 5 VDC ±5 %, 8...30 VDC.
- Reverse polarity protection: Yes.
- Consumption w/o load: ≤100 Ma.
- Pulses per revolution: 1000 … 2500.
- Reference signal: Zero pulse, width 90°.
- Sensing method: Optical.
- Output frequency: ≤120 kHz.
- Output signals: A, B, N + inverted.
- Output stages: TTL line driver (short-circuit proof), HTL push-pull (short-circuit proof).
- Interference immunity: EN 61000-6-2.
- Emitted interference: EN 61000-6-3.
Mechanical design:
- Size (flange): ø150 mm
- Shaft type: ø40...65 mm (through hollow shaft)
- Mounting kit: 051
- Protection EN 60529: IP 54
- Operating speed: ≤4000 rpm
- Material: Housing: aluminium, black, powder-coated, Shaft: stainless steel
- Operating temperature: -20...+70 °C
- Relative humidity: 90 % non-condensing
- Resistance: EN 60068-2-6, Vibration 10 g, 55-2000 Hz, EN 60068-2-27, Shock 100 g, 6 ms
- Connection: Connector M23 type 2, 12-pin
- Weight approx.: 2900 g
| Brand | Baumer Thalheim |
|---|
Write Your Own Review
Write your content here...
