Back to Top
Incremental encoders - combination, 2048 pulses per revolution
Encoder with integrated centrifugal switch:
- blind hollow shaft, 2048 pulses per revolution
- HTL output driver for cables up to 350 meters in length.
- Centrifugal force-based mechanical speed monitoring system.
- For a longer service life, use a hybrid double-side bearing.
- Turn the terminal boxes 180 degrees.
- High resilience to vibrations and shocks.
- System of seals for dusty environments.
Electrical ratings (encoder):
- Voltage supply: 9...30 VDC.
- Consumption w/o load: ≤100 mA.
- Pulses per revolution: 2048.
- Phase shift: 90 ° ±20°.
- Duty cycle: 40…60 %.
- Reference signal: Zero pulse, width 90°.
- Output frequency: ≤120 kHz.
- Output signals: K1, K2, K0 + inverted.
- Output stages: HTL-P (power line driver).
- Sensing method: Optical.
Electrical ratings (centrifugal switch):
- Switching accuracy: ± 4 % (Δn = 2 rpm/s); 20 % (Δn = 1500 rpm/s).
- Switching deviation: ≤3 % (cw-ccw rotation).
- Switching hysteresis: 40 % of switching speed.
- Switching outputs: 1 output, speed control.
- Output switching capacity: ≤6 A / 230 VAC; ≤1 A / 125 VDC, (EAC: <50 VAC / 75 VDC).
- Minimum switching current: 50 mA.
Mechanical design:
- Size (flange): ø105 mm.
- Shaft type: ø16 mm (blind hollow shaft).
- Admitted shaft load: ≤450 N axial, ≤600 N radial.
- Protection EN 60529: IP 66.
- Range of switching speed (ns): 1800...2499 rpm (Δn = 2 rpm/s).
- Operating torque typ.: 6 Ncm.
- Rotor moment of inertia: 400 gcm².
- Material: Housing: aluminium diecast, Shaft: stainless steel.
- Operating temperature: -40...+100 °C.
- Resistance: IEC 60068-2-6, Vibration 5 g, 10-2000 Hz, IEC 60068-2-27, Shock 50 g, 11 ms.
- Corrosion protection: IEC 60068-2-52 Salt mist, for ambient conditions CX (C5-M) according to ISO 12944-2.
- Connection: 2x terminal box.
- Weight approx.: 2.2 kg.
| Brand | Baumer Thalheim |
|---|
Write Your Own Review
Write your content here...
