Back to Top
KS2531 Bus Terminal, 1-channel motion interface, stepper motor, 24 V DC, 1.5 A
Load type: 2-phase stepper motor (uni-/bipolar)
Number of channels: 1
Number of outputs: 1 x stepper motor
Number of inputs: 2 x end position
Connection technology: direct motor connection
Supply voltage electronics: 24 V DC (via power contacts)
Supply voltage power: 24 V DC (internally via power contacts)
Output current: max. 1.5 A
Step frequency: max. 125,000 steps/s
Step pattern: full step, half step, up to 64-fold micro stepping
Current controller frequency: approx. 25 kHz
Resolution: approx. 5000 positions in typ. applications (per revolution)
Diagnostics LED: error phase A and B, loss of step/stagnation, power, enable
Current consumption power contacts: load only
Current consumption K-bus: typ. 60 mA
Bit width in the process image: input: n x 2 x 16 bit data, 2 x 16 bit control/status
Special features: travel distance control
Electrical isolation: 500 V (K-bus/signal voltage)
Weight: approx. 50 g
Operating/storage temperature: 0…+55 °C/-25…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance conforms to: EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to: EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP20/see documentation
Pluggable wiring for all KSxxxx Bus Terminals
Approvals/markings: CE, UL
The KL2531 Bus Terminal is intended for the direct connection of different small stepper motors.
Write Your Own Review
Write your content here...