Back to Top
Single door Mild Steel Wall mounting Enclosure MAS0202015R5
Description:
- The mounting plate for the wall-mounted single-door enclosure is included.
- Multiple-mount enclosure.
- Off-the-shelf, in a variety of sizes, is the mild steel single-door wall-mounted enclosure line, MAS, with an IP 66 protection degree.
- There are numerous applications that are ideal for this variety of enclosures.
- Since dust and water are unable to pass through the enclosure, there is no chance of component failure and the ensuing unnecessary downtime.
Features:
- The body is folded, and seam welded.
- Air circulation is made possible around the rear part of the enclosure by four 8.5 mm-diameter wall fixing holes that are pressed out in 20.4 mm-diameter × 2 mm-diameter depressions.
- For the convenience of cabling onto the mounting plate, the gland plate opening is located at the rear of the enclosure.
- Protection: Meets IP 66, TYPE 4, 12, and IK 10 standards.
- It is advised for outdoor installations to use a rain hood, an ARF, a 100% polyester paint coating, and a corrosion-protective primer.
- Both interior and outdoor applications require consideration of corrosion resistance.
- Mounting plate: To facilitate simple horizontal equipment location, the mounting plate has vertical markings positioned 10 mm apart.
- To make cable fixing easier, there are holes on both the top and bottom.
- Fixed to M8 press-welded studs at the enclosure's rear.
- From 800 mm forward, folded edges reinforce every side.
- The mounting plate location can be changed to any depth by utilizing the AMG attachment.
- Materials: Body: 1.2 mm mild steel for 155 mm enclosures; 1.4 mm for 210- or 260-mm enclosures; 1.5 mm for 300- or 400-mm enclosures; or if the enclosure's height or width is larger than 1000 mm.
- Mild steel, 1.4 mm thick gland plate.
- The door: 1.2 mm mild steel; 1.5 mm for enclosures 500 mm or larger; 2 mm for enclosures 800 mm or larger, accordingly.
- Mounting plate: 2 mm thick steel, galvanized.
- Lock: a 3 mm Vent HOFFMAN-customized double-bit lock with an anti-vibration mechanism and a 90° movement.
- For enclosures ranging from 600 mm to 800 mm in height, there are two locks.
- Three-point locking espagnolette for enclosures higher than 1000 mm.
- Additional inserts can be purchased as an accessory.
- Finish: powder coating with structure in RAL 7035.
- Door: 130° opening, surface mounted.
- Hidden detachable hinges using a captive pin.
- It is possible to mount hinges so that they open left or right.
- Door profiles (MMDP) are mounted using inner M6 welded studs.
- An injected, one-piece polyurethane gasket ensures sealing.
- Door and mounting plate-equipped enclosure (not included for item numbers ending in PER5).
- There are two MMDP door mounting profiles for heights greater than 600 mm.
- Mounting attachments, plastic double-bit 3 mm key, and gland plate(s) with gasket(s).
- Metallic key, suitable for users 1000 mm and above.
- facility earthing.
- Enclosures that are 1000 mm or higher have three-point espagnolette locking.
Specifications:
- Height: 200mm
- Width: 200mm
- Depth: 155mm
- Material: Mild steel
- Finish: powder coated
- Color: Light grey, RAL 7035
- Body thickness: 1.5mm
- Door thickness: 1.5mm
- Latch quantity: 1.
- Cable entry: 110 x 56mm
- Cable entry quantity: 1
- Panel size: 170 x 150mm
Brand | nVent HOFFMAN |
---|
Write Your Own Review
Write your content here...