Back to Top
Single door Mild Steel Wall mounting Enclosure MAS0808021R5
Description:
- Off-the-shelf, in a variety of sizes, is the mild steel single-door wall-mounted enclosure line, MAS, with an IP 66 protection degree.
- There are numerous applications that are ideal for this variety of enclosures.
- Since dust and water cannot enter the enclosure, there is no chance of component failure and the ensuing needless downtime.
Features:
- Body: seam-welded and folded.
- Air circulation is facilitated around the rear portion of the enclosure by four 8.5 mm-diameter wall fixing holes that are pressed out in 20.4 mm-diameter × 2 mm depressions.
- To facilitate cabling onto the mounting plate, the gland plate opening is located at the very back of the enclosure.
- Protection: IP 66 | TYPE 4, 12 | IK 10 compliant.
- It is advised to utilize a rain hood, an ARF, a 100% polyester paint coating, and a corrosion-protective primer for outdoor installation.
- Both interior and outdoor applications require consideration of corrosion resistance.
- Mounting plate: To facilitate simple horizontal equipment location, the mounting plate has vertical markings spaced 10 mm apart.
- To make cable fixing easier, there are holes on both the top and bottom.
- Affixed to M8 press-welded studs at the enclosure's back.
- From 800 mm forward, folded edges reinforce every side.
- The mounting plate location can be changed to any depth by utilizing the AMG attachment.
- Content: Body: 1.2 mm mild steel for 155 mm enclosures; 1.4 mm for 210- or 260-mm enclosures; 1.5 mm for 300- or 400-mm enclosures; or if the enclosure's height or width is larger than 1000 mm.
- Mild steel, 1.4 mm thick gland plate.
- Entryway: 1.2 mm mild steel; 1.5 mm for enclosures 500 mm or larger; 2 mm for enclosures 800 mm or larger respectively.
- Mounting plate: 2 mm thick steel, galvanized.
- Lock: a 3 mm Vent HOFFMAN-customized double-bit lock with anti-vibration technology and a 90° movement.
- For enclosures 600 mm to 800 mm height, there are two locks.
- Three-point locking espagnolette for enclosures higher than 1000 mm.
- Additional inserts can be purchased as an accessory.
- Finish: Powder coating with structure in RAL 7035.
- Door: 130° opening, surface mounted.
- Hidden detachable hinges using a captive pin.
- It is possible to mount hinges such that they open left or right.
- Door profiles (MMDP) are mounted using inner M6 welded studs; refer to delivery.
- An injected, one-piece polyurethane gasket ensures sealing.
- Doors and mounting plates are not included in the enclosure (item numbers ending in PER5).
- There are two MMDP door mounting profiles for heights greater than 600 mm.
- Mounting attachments, plastic double-bit 3 mm key, and gland plate(s) with gasket(s).
- For heights greater than 1000 mm, a metallic key.
- Facility earthing.
Specifications:
- Height: 800mm.
- Width: 800mm.
- Depth: 210mm.
- Mounting plate included.
- Material: Mild steel.
- Finish: Powder coated.
- Color: Light grey.
- Color code: RAL 7035.
- Body thickness: 1.5mm.
- Door thickness: 2mm.
- Latch Quantity: 2.
- Cable entry: 310 x 96mm.
- Cable entry quantity: 1.
- Pannel size: 770 x 750mm.
Brand | nVent HOFFMAN |
---|
Write Your Own Review
Write your content here...