Features:

• Body: seam-welded and folded.
• Air circulation is facilitated around the rear portion of the enclosure by four 8.5 mm-diameter wall fixing holes that are pressed out in 20.4 mm-diameter × 2 mm depressions.
• To facilitate cabling onto the mounting plate, the gland plate opening is located at the very back of the enclosure.
• Protection: IP 66 | TYPE 4, 12 | IK 10 compliant.
• It is advised to utilize a rain hood, an ARF, a 100% polyester paint coating, and a corrosion-protective primer for outdoor installation.
• Both interior and outdoor applications require consideration of corrosion resistance.
• Mounting plate: To facilitate simple horizontal equipment location, the mounting plate has vertical markings spaced 10 mm apart.
• To make cable fixing easier, there are holes on both the top and bottom.
• Affixed to M8 press-welded studs at the enclosure's back.
• From 800 mm forward, folded edges reinforce every side.
• The mounting plate location can be changed to any depth by utilizing the AMG attachment.
• Content: Body: 1.2 mm mild steel for 155 mm enclosures; 1.4 mm for 210- or 260-mm enclosures; 1.5 mm for 300- or 400-mm enclosures; or if the enclosure's height or width is larger than 1000 mm.
• Mild steel, 1.4 mm thick gland plate.
• Entryway: 1.2 mm mild steel; 1.5 mm for enclosures 500 mm or larger; 2 mm for enclosures 800 mm or larger respectively.
• Mounting plate: 2 mm thick steel, galvanized.
• Lock: a 3 mm Vent HOFFMAN-customized double-bit lock with anti-vibration technology and a 90° movement.
• For enclosures 600 mm to 800 mm height, there are two locks.
• Three-point locking espagnolette for enclosures higher than 1000 mm.
• Additional inserts can be purchased as an accessory.
• Finish: Powder coating with structure in RAL 7035.
• Door: 130° opening, surface mounted.
• Hidden detachable hinges using a captive pin.
• It is possible to mount hinges such that they open left or right.
• Door profiles (MMDP) are mounted using inner M6 welded studs; refer to delivery.
• An injected, one-piece polyurethane gasket ensures sealing.
• Doors and mounting plates are not included in the enclosure (item numbers ending in PER5).
• There are two MMDP door mounting profiles for heights greater than 600 mm.
• Mounting attachments, plastic double-bit 3 mm key, and gland plate(s) with gasket(s).
• For heights greater than 1000 mm, a metallic key.
• Facility earthing.

Specifications:

• Height: 800mm.
• Width: 800mm.
• Depth: 400mm.
• Mounting plate included.
• Material: Mild steel.
• Finish: Powder coated.
• Color: Light grey.
• Color code: RAL 7035.
• Body thickness: 1.5mm.
• Door thickness: 2mm.
• Latch Quantity: 2.
• Cable entry: 310 x 96mm.
• Cable entry quantity: 2.
• Pannel size: 770 x 750mm.