Features:

• Material: Painted 1.5 mm steel frame.
• Doors: coated steel, 2 mm thick.
• Side, roof, and rear panels are painted 1.5 mm steel.
• Mounting plate: galvanized steel, 3 mm thick.
• Steel bottom plates, 1 mm galvanized.
• Frame: In accordance with DIN 43660, seam-welded inverted open profiles with a 25 mm hole pattern.
• Incorporating a pattern of integrated exterior holes.
• Doors: mounted using four hinge points.
• Comprising a door frame with a hole pattern of 25 mm.
• It is not possible to reverse doors.
• In order to lock left-hand doors, separate doors must be ordered.
• M6 torx screws are used to fit the rear panel.
• Standard hardware for installing rear doors.
• Split rear panels with enclosures that are 1600 mm wide.
• The back door is included with the RD version rather than a back panel.
• Side panels are available as an add-on.
• Roof panel: easily removed.
• Lock: The main door's Espagnolette 4-point locking system and the slave door's 2-point locking system.
• Typical double-bit lock featuring a 3 mm insert.
• Accessories include T-handles, lift handles, cylinders, and standard inserts.
• Bottom plates: made up of three or four parts (D > 600).
• Mounting plate: It slides into place after being double-folded.
• Depth can be adjusted in 25-mm increments with the MPD02 accessory.
• Supplied, affixed to the exterior of the enclosure package.
• Earthing: Every panel has a distinct earthing stud and is earthed through its fittings.
• Finish: powder coating with structure in RAL 7035.
• Protection: IP55, TYPE 12, and IK 10 compliant.
• Installation requirements: ready for combined installation with standard delivery.
• Add side panels for standalone installation.
• Delivery: door frame (not included for the PER5 version), bottom plates, roof panel, rear panel, and fitted doors on a frame.
• Two CMB profiles mounted in depth are included in the package for enclosures 2200 mm in height.
• The delivery also includes bolts for earthing.
• Supplied on a pallet that matches the enclosure's width to permit baying without removal.

Specifications:

• Height: 1800mm.
• Width: 800mm.
• Depth: 500mm.
• Door/Rear panel: Rear panel.
• Mounting plate included.
• Material: Mild steel.
• Finish: Powder coated.
• Colour: Light Grey.
• Colour code: RAL 7035.
• Body thickness: 1.5mm.
• Door thickness: 2mm.