Back to Top
MCZ OVP SL 24VDC 0 5A
MCZ OVP SL 24VDC 0,5A:
- Surge protection for instrumentation and control; surge protection for measurement and control.
- Tension clamp connection on slimline overvoltage protection terminal.
- Six-millimetre Slimline fine overvoltage safeguard.
- TS contact and tension clamp connections allow for faster wiring.
- able to form cross-connections.
Specifications dimensions and weights:
- Depth: 63.5 mm.
- Depth (inches): 2.5 inch.
- Height: 91 mm.
- Height (inches): 3.583 inch.
- Width: 6 mm.
- Width (inches): 0.236 inch.
- Net weight: 23.7 g.
Temperatures:
- Storage temperature: -40 °C - 85 °C.
- Operating temperature: -40 °C - 60.
Environmental Product Compliance:
- REACH SVHC: Lead 7439-92-1.
- SCIP: c9db83e7-2b25-44e1-8d26-da64d426373f.
Rated data UL:
- Certificate No. (UL): E311081.
General data:
- Colour: black.
- Design: Terminal.
- Height with TS 35: 63.5 mm.
- Protection degree: IP20.
- Rail: TS 35.
- Segment: Measurement - Monitoring - Setting.
- UL 94 flammability rating: V-0.
- Version: Surge protection for measurement and control.
Insulation coordination acc. to EN 50178:
- Pollution severity: 2.
- Surge voltage category: III.
Rated data IEC / EN:
- Discharge current, Iimp (10/350 µs): 1 kA.
- Discharge current, max. (8/20 µs): 5 kA.
- Fuse: 0.5 A.
- Inductance L and L1: 75 µH.
- Lightning test current Iimp (10/350 µs): 1 kA.
- Limiting frequency (-3 dB) at load resistance: 500 kHz 240 Ω.
- Load resistance (for limiting frequency): 240 Ω.
- Max. continuous voltage, Uc (AC): 28 V.
- Operating current, Imax.: 0.5 A.
- Operating voltage: 28 V.
- Protection level on output side Wire-PE 1kV/µs, typically: 40 V.
- Protection level on output side Wire-PE 8/20 µs, typically: 65 V.
- Protection level on output side Wire-wire 1 kV/µs, typically: 80 V.
- Protection level on output side Wire-wire 8/20 µs, typically: 130 V.
- Rated current IN: 0.5 A.
- Rated voltage (DC): 24 V.
- Rated voltage (DC), max.: 28 V.
- Requirements category acc. to IEC 61643-21: D1.
- Response time: ≤ 100 ps.
- Voltage type: DC.
- Volume resistance: 2.50 Ω.
Connection data:
- Cross-section: 1.5 mm².
- Stripping length: 8 mm.
- Wire connection method: Spring connection.
- Type of connection: Tension-clamp connection.
- Stripping length, rated connection: 8 mm.
- Clamping range, rated connection: 1.5 mm².
- Clamping range, min.: 0.5 mm².
- Clamping range, max.: 1.5 mm².
- Wire connection cross section AWG, min.: AWG 26.
- Wire connection cross section AWG, max.: AWG 16.
- Wire cross-section, solid, min.: 0.5 mm².
- Wire cross-section, solid, max.: 1.5 mm².
- Wire cross-section, solid, min. (AWG): AWG 26.
- Wire cross-section, solid, max. (AWG): AWG 16.
- Wire connection cross section, finely stranded, min.: 0.5 mm².
- Wire connection cross section, finely stranded, max.: 1.5 mm².
- Wire cross-section, finely stranded, min. (AWG): AWG 26.
- Wire cross-section, finely stranded, max. (AWG): AWG 16.
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 0.5 mm².
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 1.5 mm².
- Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 0.5 mm².
- Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 1.5 mm².
- Blade size: 0.6 x 3.5 mm.
Brand | Weidmuller |
---|
Write Your Own Review
Write your content here...