Back to Top
Motion Monitor for Secure and Redundant Control of 2 Drive Systems MS640
Pricing available on request
Description:
- With a high level of internal and exterior safety, the Motrona MS640 Motion Monitor is made for safe and redundant drive system control.
- This apparatus is used to monitor motor rotations and related drive-side machine movements in a logical and credible manner.
- By contrasting them with preprogrammed setpoint states, it finds actual states at the drive and surrounding area.
- The MS640 uses the outputs to send a user-programmed fault message if the movement is implausible or if limit values are exceeded.
- Furthermore, both rotary encoders' real values—speed, rotational direction, standstill, actual position, and position difference—can be permanently detected by the monitor.
Specifications:
- Pulse Inputs: 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422].
- Control Inputs: 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC].
- Logical Inputs: 6 logical inputs for PNP signals [10 ... 30 VDC].
- Input Frequency: Up to 500 kHz.
- Transistor Outputs: 4 fast transistor outputs with push-pull characteristic, short-circuit-proof [5 ... 30 VDC].
- Relay Outputs: 4 forced-guided redundant output relays with potential-free change-over contact.
- Serial Interface: RS232 and RS485.
- Power Supply: 24 VAC and 17 ... 40 VDC.
- Housing: Compact norm panel housing.
- Display: 6 digits LED display with 15 mm height.
- Display Range: -199999 to 999999.
- Setup: Via keys or PC using the serial RS232 interface.
- Dimensions: 110 x 48 x 140 mm (4.33 x 1.89 x 5.51 inches).
| Brand | Motrona |
|---|
Write Your Own Review
Write your content here...
