Specifications:

• Interface: SSI (Synchronous Serial Interface).
• Resolution:
• Single turn: 13-bit (8192 steps per revolution).
• Multiturn: 12-bit (4096 revolutions).
• Multiturn Technology: Mechanical Gearing (no battery).
• Output Driver: RS422.
• Supply Voltage: 4.5 – 30 VDC.
• Power Consumption: ≤ 1.5 W.
• Start-Up Time: < 1 s.
• Clock Frequency: 100 kHz – 2 MHz.
• Reverse Polarity Protection: Yes.
• Short Circuit Protection: Yes.
• EMC Compliance:
• Emitted Interference: DIN EN 61000-6-4.
• Noise Immunity: DIN EN 61000-6-2.
• MTTF: 16.2 years @ 40°C.
• Accuracy (INL): ±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit).
• Code: Grey.
• Protection Class (Shaft): IP65.
• Protection Class (Housing): IP66/IP67.
• Operating Temperature: -40°C to +85°C.
• Humidity: 98% RH, no condensation.
• Housing Material: Steel.
• Housing Coating: Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spray resistance).
• Flange Type: Clamp, ø 58 mm.
• Flange Material: Aluminium.
• Shaft Type: Solid, Single Flat, Length = 20 mm.
• Shaft Diameter: ø 10 mm.
• Shaft Material: Stainless Steel V2A (1.4305, 303).
• Max. Shaft Load: Axial 40 N, Radial 110 N.
• Minimum Mechanical Lifetime:
• 430 (20 N / 40 N).
• 150 (40 N / 60 N).
• 100 (40 N / 80 N).
• 55 (40 N / 110 N) (10^8 revolutions with Fa/Fr).
• Rotor Inertia: ≤ 30 gcm².
• Friction Torque: ≤ 3 Ncm @ 20°C.
• Max. Permissible Mechanical Speed: ≤ 12000 1/min.
• Shock Resistance: ≤ 100 g (half sine 6 ms, EN 60068-2-27).
• Permanent Shock Resistance: ≤ 10 g (half sine 16 ms, EN 60068-2-29).
• Vibration Resistance: ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6).
• Length: 52.7 mm.
• Weight: 285 g.
• Electrical Connection: Radial Connector M23, Male, 12 pin, CCW / left.
• Certification: CE + cULus.