Power Supply Accessories HLG-80H-24

ZAR 0.00

Out of stock

SKU

HLG-80H-24

80W Constant Voltage + Constant Current LED Driver:

The HLG-80H series is a 80W AC/DC LED driver with dual modes of constant voltage and current output.
HLG-80H operates from 90～305VAC and offers models with different rated voltage ranging between
12V and 54V.
Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to
operate for -40℃ ~ +80℃ case temperature under free air convection.
The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications.
HLG-80H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

DC VOLTAGE: 24V.
CONSTANT CURRENT REGION Note.4: 14.4 ~ 24V.
RATED CURRENT: 3.4 A.
RATED POWER: 81.6 W.
NOISE & RIPPLE (max.) Note 2: 150 mVp-p.
VOLTAGE ADJUSTMENT RANGE: Adjustable for A-Type only (via built-in potentiometer) 22 – 27 V.
Current adjustment range: Adjustable for A-Type only (via built-in potentiometer) 2.04 – 3.4 A.
VOLTAGE TOLERANCE: Note 3: ±1.0%
Regulated line: ±0.5%
Regulating load: ±0.5%
Setup and rise time note.6: 1200ms,200ms/115VAC 500ms,200ms/230VAC.
Hold Up Time (Typ.): 16ms at full load 230VAC /115VAC.

VOLTAGE RANGE: 90 – 305 VAC 127 – 431 VDC.
Frequency range: 47 – 63 Hz.
POWER FACTOR (Typ.): PF>0.96/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load.
Total harmonic distortion: THD< 20% (at load≧60% / 115VAC,230VAC; at load≧75% / 277VAC).
EFFICIENCY (Type): 90.5%.
AC CURRENT (Typ.): 0.85A / 115VAC 0.425A / 230VAC 0.4A / 277VAC.
INRUSH CURRENT (Type): COLD START 70A(twidth=485 s measured at 50% I μ peak) at 230VAC; Per NEMA 410.
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC.
LEAKAGE CURRENT: <0.75mA / 277 VAC.

Over Current: 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed.
Short Circuit: Hiccup mode recovers automatically after fault condition is removed.
OVER VOLTAGE: 28 ~ 35V Shut down o/p voltage, re-power on to recover.
OVER TEMPERATURE: Shut down o/p voltage, re-power on to recover.

WORKING TEMP: Tcase= -40 - +80℃.
MAX. CASE TEMP: Tcase= +80℃.
Working Humidity: 20 ~ 95% RH non-condensing.
STORAGE TEMP, HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH.
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 55℃).
VIBRATION: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes.

SAFETY STANDARDS: UL8750(type”HL”), CSA C22.2 No. 250.0-08, UL8750 LISTED for HLG-80H- BL;BS EN/EN/AS/NZS 61347-1,BS EN/EN/AS/NZS 61347-2-13 J61347-1, J61347-2-13(except for B,AB and D-type), GB19510.1,independent, GB19510.14,EAC TP TC 004,BIS IS15885(for 36A, 54A only), IP65 or IP67,KC61347-1,KC61347-2-13(except for AB,BL-type) approved.
Withstand voltage: I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC.
Isolation resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH.
EMC EMISSION: Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧60%); BS EN/EN61000-3-3,GB/T 17743 , GB17625.1, EAC TP TC 020.
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020.

MTBF: 913.4K hrs min; 2992.9K hrs min. Telcordia SR-332 (Bellcore) ; 289.1K hrs min. MIL-HDBK-217F (25℃).
Dimensions (L x W x H): 195.6 x 61.5 x 38.8 mm.
Packing: 0.84Kg; 16pcs/14.4Kg/0.54CUFT.

More Information
Brand	Normand

Write Your Own Review

Write your content here...

Compare Products

You have no items to compare.