Back to Top
Programmable Pulse and Frequency Multiplier FM260
Frequency dividers and multipliers:
- The FM260 Programmable Pulse and Frequency Multiplier multiplies incoming signals from incremental encoders and measurement systems by a proportional and reciprocal factor (both adjustable from 0.0001 to 9.9999).
- Accurate pulse multiplication considering the direction of rotation, so cumulative pulse errors are impossible.
- Additional features are available, such as customizable marker pulse distance.
Programmable Pulse and Frequency Multiplier:
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B, Z, /Z [RS422].
- 4 control inputs for PNP signals [10 ... 30 VDC.
- Input and output frequency up to 1 MHz.
- Pulse output with format A, /A, B, /B, Z, /Z and push-pull characteristic, [5 ... 30 VDC].
- Power supply 11 ... 30 VDC.
- Snap-on housing for top hat rail (according to EN 60715).
- LCD display, backlighted.
- Setup via keys, RS232 or USB-Port.
- The device multiplies an incoming frequency by a proportional factor F1 and a reciprocal factor F2. The two factors F1 and F2 are adjustable in the range of 0.0005 to 9.9999.
- All operation modes provide error-free frequency conversion, with full consideration of the A / B phase and direction of the quadrature signals, therefore no cumulative errors, even with continuous change of directions and vibrations.
- Zero pulse generator: the frequency multiplier generates at the output an index signal with adjustable pulse interval, which can be synchronized as needed with the zero pulse at the input.
| Brand | Motrona |
|---|
Write Your Own Review
Write your content here...
