Back to Top
Rotating Cross Cutter Firmware CT803
Controllers for rotating crosscutters:
- The CT803 firmware, together with the MC800 hardware, is utilized in machine applications such as rotary crosscutters and other rotary applications.
- The MC800 hardware and the CT803 firmware excel because of their quick position control cycles, high dynamics, and accurate cuts.
- The Motrona MC800 multi-axis motion controller, a successor to the successful MC700, features a larger bandwidth and a more flexible bus architecture.
- Different encoders and other sensor systems can be connected thanks to the universal encoder inputs.
- This system's unique feature is the integrated tandem drive controller, which divides power between two separate drives to meet the acceleration needs of the following axis.
Flying Material Processing Firmware:
- Two pulse inputs with the format A, /A, B, /B, Z, /Z [HTL, RS422] with input frequencies up to 2 MHz.
- 2 control inputs in the format SIN+, SIN-, COS+, COS- [1 Vss] with input frequencies up to 400 kHz.
- 2 SSI inputs with formats DATA+, DATA-, CLOCK+, and CLOCK- up to 25 bits, with SSI switching frequencies ranging from 100 Hz to 1 MHz.
- 2 scalable 14-bit analogue inputs for 0/4... 20 mA, or ±10 V.
- 4 control inputs for PNP and NPN signals (10... 30 VDC).
- 4 fast interrupt inputs [10–30 VDC] for PNP and NPN signals.
- 1 pulse output in the A, /A, B, /B, Z, /Z format [RS422].
- 4 control outputs with push-pull characteristics and short-circuit-proof [5... 30 VDC].
- 2 scalable 14-bit analogue outputs for 0/4... 20 mA or ±10 V.
- Loop time is approximately 250 µs.
- Power supply: 18...35 VDC.
- Snap-on housing for the top hat rail (according to EN 60715).
- Interfaces onboard: USB 2.0, CANopen, Ethernet/IP, RS232/RS485, and Modbus RTU.
- Ethernet interfaces that are optional include Powerlink, PROFINET, EtherCAT, Ethernet/IP, Modbus TCP, and SERCOS III.
- Optional Fieldbus interfaces (slave) include CC-Link, DeviceNet, and PROFIBUS.
- It functions with all 4-Q-drive systems and has a standardized drive communication bus, such as SERCOS-II. An alternative setpoint of ±10 V can be used.
- The controllers can be set up by an external operator terminal as well as HMIs using a standardized factory communication bus, such as PROFINET.
- Setup using the free Windows operator program.
Brand | Motrona |
---|
Write Your Own Review
Write your content here...