Back to Top
Siemens S7-1200 Signal boards - digital DI 2x24 V DC/DQ 2x24 V DC 0.1 A 200 kHz
Pricing available on request
Description:
- This board adds 2 digital inputs and 2 digital outputs to the CPU, optimized for fast edge detection and pulse control in industrial environments.
- It’s ideal for applications like encoder feedback, actuator triggering, or high-speed digital interfacing.
Specifications:
- Electrical Characteristics:
- Rated Voltage: 24 V DC (inputs and outputs).
- Power Loss: 0.5 W.
- Backplane Bus Current: 35 mA.
- Short-Circuit Protection: Not included.
- Digital Inputs:
- Channels: 2 (current sourcing).
- Signal Levels:
- “0”: L+ minus 1.0 V to L+.
- “1”: 0 V to L+ minus 2.0 V.
- Input Current:
- “0”: Max 1.4 mA.
- “1”: Min 2.9 mA, Typ 7 mA.
- Input Delay:
- Ultra-fast: 0.1–20.0 µs.
- Standard: 0.05–20.0 ms (parameterizable).
- Cable Length: Up to 50 m (shielded).
- Digital Outputs:
- Channels: 2 (MOSFET, solid-state).
- Signal Levels:
- “0”: Max 1 V.
- “1”: Min L+ minus 1.5 V.
- Output Current:
- Rated & Max: 0.1 A.
- Load Resistance: Up to 11 Ω.
- Cable Length: Up to 50 m (shielded).
- Mechanical & Environmental:
- Dimensions (W x H x D): 38 × 62 × 21 mm.
- Mounting: Direct CPU attachment.
- Protection Rating: IP20.
- Operating Temp: –20 to +60 °C.
- Storage Temp: –40 to +70 °C.
- Humidity: Up to 95% (non-condensing).
- Weight: ~35 g.
- Compliance & Approvals:
- CE, UL, CSA, FM, RCM, KC.
- Marine: DNV, BV, RMRS, CCS, ABS, RINA.
- Hazardous Location: ATEX, IECEx.
- Diagnostic LEDs for both inputs and outputs.
| SKU | 6ES7223-3BD30-0XB0 |
|---|---|
| Brand | Siemens |
Write Your Own Review
Write your content here...
